Tahki Yarns Fernley Hat Scarf Knitting Pattern

Tahki Yarns Fernley Hat & Scarf Pattern Summary

Overview

The Fernley Hat & Scarf is a coordinated two-piece set designed by Vera Keller, offering an advanced beginner knitter the opportunity to create a sophisticated accessory pairing. This downloadable PDF pattern provides instructions for both a structured hat and an elongated scarf, each featuring elegant striping and chevron stitch details. The set is worked primarily flat on straight needles, with seamless construction techniques that minimize finishing work.

Hat Construction

The Fernley Hat is worked bottom-up and flat on US size 4 (3.5mm) needles, then sewn together at the sides to create a finished circumference of 16¾ inches (42.5 cm). The hat begins with a 2x2 ribbed cuff measuring 6 inches (15 cm) in length, which provides elasticity and a polished edge. After the ribbing is complete, 12 stitches are increased evenly across the final row to transition to the main pattern section. The crown is then worked in chevron stitch combined with stripe patterning, continuing for 13 inches (33 cm) from the cast-on edge. The pattern note indicates that when changing colors, the unused yarn is carried loosely up the side edge, a technique that maintains tension and reduces weaving-in work during finishing. An optional pompom can be added to the crown for additional embellishment.

Scarf Construction

The Fernley Scarf is also worked flat on US size 4 (3.5mm) needles and measures 16¾ inches (42.5 cm) wide by 66 inches (167.5 cm) long. Like the hat, the scarf is constructed bottom-up using the same chevron stitch pattern combined with stripe patterning. The scarf begins with a cast-on of 152 stitches and is worked continuously until reaching the full 66-inch length, ending with a wrong-side row in the main color before binding off all stitches knitwise. The color-carrying technique used in the hat is applied here as well, allowing for efficient color changes without excessive yarn ends to weave in.

Stitches & Techniques

• Chevron Stitch: The primary decorative stitch used throughout both pieces, creating a distinctive zigzag or wave pattern that adds visual interest and texture
• 2x2 Ribbing: Used exclusively for the hat's cuff to provide stretch and structure
• Stripe Patterning: Worked simultaneously with the chevron stitch, alternating between two colors to create horizontal color blocks
• Knit and Purl: Fundamental stitches that form the basis of the ribbed and patterned sections
• Increases (M1): Used to transition from the ribbed cuff to the wider patterned section of the hat
• Decreases (k2tog): Employed as part of the chevron stitch pattern to create the characteristic peaks and valleys
• Flat Construction: Both pieces are worked back and forth on straight needles rather than in the round, simplifying the knitting process for intermediate crafters
• Color Carrying: The technique of loosely carrying unused yarn up the side edge during stripe changes, reducing finishing work and maintaining even edges

Materials & Gauge

The Fernley set is designed to be worked with Tahki Yarns Donegal Tweed Fine, a blend of 70% wool and 30% mohair that provides warmth, softness, and subtle texture. The pattern calls for 4 balls of Donegal Tweed Fine in color #2720 eggplant (main color) and 3 balls in color #2704 light grey (contrast color). Each ball contains 1.75 ounces (50 grams) and 218 yards (199 meters) of yarn, allowing for a total of approximately 872 yards for the hat and 654 yards for the scarf, with yardage remaining for the optional pompom.

The recommended gauge is 36 stitches and 36 rows over 4 inches (10 cm) in chevron pattern, worked on US size 4 (3.5mm) needles. Checking gauge before beginning is essential, as even small variations can significantly affect the final measurements of both pieces. A yarn needle is required for weaving in ends